paskal
07-20 08:33 PM
a link that says 485 filing needs tax returns.
please see the official instructions with the 485 form and note what is actually asked for- it's not much- and no W2 or tax returns are mentioned.
please see the official instructions with the 485 form and note what is actually asked for- it's not much- and no W2 or tax returns are mentioned.
wallpaper PC#39;s hardware components
gulute
10-02 02:39 PM
Did you use an approved labor?
the RFE was on Ability to Pay
the RFE was on Ability to Pay
minimalist
11-16 10:39 PM
Nope. That is not true. Either the company/lawyer is screwing your friend!
You can avoid the waiting period by using "Notice and Consider".
I had the same experience with FDBL lawyers, those guys were awful.
Luckily BAL took over, and they mentioned about "Notice and Consider" and did make use of that for labor filing.
Hope this helps.
You cannot file labor when there are lay-offs. Something to do with how can you hire some foreign labor when youbjusrt fired some.
Unlike belmontboy,I don't have first hand experience though. Hopefully other members will shed some more light.
You can avoid the waiting period by using "Notice and Consider".
I had the same experience with FDBL lawyers, those guys were awful.
Luckily BAL took over, and they mentioned about "Notice and Consider" and did make use of that for labor filing.
Hope this helps.
You cannot file labor when there are lay-offs. Something to do with how can you hire some foreign labor when youbjusrt fired some.
Unlike belmontboy,I don't have first hand experience though. Hopefully other members will shed some more light.
2011 PC#39;s hardware components
tnite
07-26 09:27 AM
Hello everyone,
I got to know about this website recently and I wish I had known it earlier.
Anyway, I need advice/conformation
I got married recently outside the US. However, I did not come back with my wife b/c of a couple of reasons. And I cannot bring her here in the next 3 weeks. (My H1B is getting renewed...)
The company's lawyer is advising me not file for I-485 and wait till I become current again and apply with my wife then. (I am EB3 and my PD is March 2005)
After reading this web and others, if I go ahead and apply now the following are the choices that I have later. Please confirm if I am right or wrong
1. Get every document ready for my wife at all times and apply for I-485 immediately after I become current. As long as they receive her I-485 before they approve mine, she is going to be fine. She will be fine even if they receive her I-485 a day before they approve mine.
2. If my I-485 gets approved before my wife’s I-485 get there, under section 245(k), she has 180 days to send in her I-485 as long as PD is current. And there is no penalty and no other problem with this. She can stay in the country and wait for her I-485 to approve.
3. If I though that it was a grave mistake to apply for my I-485, I can withdraw it before it gets approved and reapply later with my wife’s when I become current again. No problem with this other than paying the fees again.
4. My wife and change her H4 to F1 any time she wants to as long as she goes to school full time. She could be on F1 and apply for I-485 when I become current (I feel uneasy on this one).
Please, let me know if what I listed above is right. These are the only choices that I have ready about. If there are more choices please, let me know that too. I have to make a decision by the end of tomorrow. Thank you all!
I think your lawyer is too optimistic about EB3 March 2005 being current in the immediate future.Maybe he's right .I dont know
But looking at the possible choice you have mentioned :
1.This is the best option . ie you apply for I485 right now and add you wife when she's in the US later when the date is current.The reason being that for USCIS to approve your GC the date should be current and if its current then you're eligible to apply for your wife's I485.Its a loop. For one thing(GC Approval) to happen the other thing(Date being current) has to happen.
2.The 2nd choice is same as the 1st one. Many here are prediciting that there will be severe retrogression in the Oct bulletin and no one with a right state of mind can even guess the dates at this point of time.
3.Why do you think it would be a grave mistake in life? If you think u'r taking a big risk then make your wife's status independent of your's by applying for H1b or F1 which is option 4. You should talk to a lawyer about the intent issues on F1 visa. I am not aware of that. I know that if one's one F1 or any other non-dual intent visa they shouldnt(risky and chances are higher for denial) apply for any immigrant visa within 90 days of their arrival or in your wife's case change of status.Search for more info on the web.
But my choice would be the first one. It's not risky for the reasons I had mentioned.
my 2 cents
I got to know about this website recently and I wish I had known it earlier.
Anyway, I need advice/conformation
I got married recently outside the US. However, I did not come back with my wife b/c of a couple of reasons. And I cannot bring her here in the next 3 weeks. (My H1B is getting renewed...)
The company's lawyer is advising me not file for I-485 and wait till I become current again and apply with my wife then. (I am EB3 and my PD is March 2005)
After reading this web and others, if I go ahead and apply now the following are the choices that I have later. Please confirm if I am right or wrong
1. Get every document ready for my wife at all times and apply for I-485 immediately after I become current. As long as they receive her I-485 before they approve mine, she is going to be fine. She will be fine even if they receive her I-485 a day before they approve mine.
2. If my I-485 gets approved before my wife’s I-485 get there, under section 245(k), she has 180 days to send in her I-485 as long as PD is current. And there is no penalty and no other problem with this. She can stay in the country and wait for her I-485 to approve.
3. If I though that it was a grave mistake to apply for my I-485, I can withdraw it before it gets approved and reapply later with my wife’s when I become current again. No problem with this other than paying the fees again.
4. My wife and change her H4 to F1 any time she wants to as long as she goes to school full time. She could be on F1 and apply for I-485 when I become current (I feel uneasy on this one).
Please, let me know if what I listed above is right. These are the only choices that I have ready about. If there are more choices please, let me know that too. I have to make a decision by the end of tomorrow. Thank you all!
I think your lawyer is too optimistic about EB3 March 2005 being current in the immediate future.Maybe he's right .I dont know
But looking at the possible choice you have mentioned :
1.This is the best option . ie you apply for I485 right now and add you wife when she's in the US later when the date is current.The reason being that for USCIS to approve your GC the date should be current and if its current then you're eligible to apply for your wife's I485.Its a loop. For one thing(GC Approval) to happen the other thing(Date being current) has to happen.
2.The 2nd choice is same as the 1st one. Many here are prediciting that there will be severe retrogression in the Oct bulletin and no one with a right state of mind can even guess the dates at this point of time.
3.Why do you think it would be a grave mistake in life? If you think u'r taking a big risk then make your wife's status independent of your's by applying for H1b or F1 which is option 4. You should talk to a lawyer about the intent issues on F1 visa. I am not aware of that. I know that if one's one F1 or any other non-dual intent visa they shouldnt(risky and chances are higher for denial) apply for any immigrant visa within 90 days of their arrival or in your wife's case change of status.Search for more info on the web.
But my choice would be the first one. It's not risky for the reasons I had mentioned.
my 2 cents
more...
dixie
09-05 01:12 PM
If you consider carefully, all the sponsors of SKIL whether its the house or the senate are republicans. Dems are pro-immigration in general, but they are more concerned about the illegals.Republicans on the other hand are anti-immigration in general, but pro-business; which roughly translates to pro-legal immigration. So by no means is SKIL a slum-dunk; if anything, CIR might come in for more favorable review by the dem-controlled house.Things will get interesting is all we can say.
I would like to discuss two issues
1) Is there a reasonable chance for Democrats to take control of the House after Nov elections.
2) What would that mean for skilled legal Immigrant community (aka will my GC come faster :))
It looks like Americans are fed up with the war in Iraq and other issues. Especially here in TX there is one seat definitely going to Democrats ( Tom Delay's seat). Would a Democrat majority make passing SKIL a slam dunk ?
I would like to discuss two issues
1) Is there a reasonable chance for Democrats to take control of the House after Nov elections.
2) What would that mean for skilled legal Immigrant community (aka will my GC come faster :))
It looks like Americans are fed up with the war in Iraq and other issues. Especially here in TX there is one seat definitely going to Democrats ( Tom Delay's seat). Would a Democrat majority make passing SKIL a slam dunk ?
PixelPix
February 2nd, 2004, 11:32 PM
Here are the compatable lenses from the spec sheet:
Compatible Lenses
1) DX Nikkor : All functions supported
2) Type G or D AF Nikkor : All functions supported 3) Micro Nikkor 85 mm F2.8D : All functions supported except autofocus and some exposure modes 4) Other AF Nikkor*2 : All functions supported except 3D colour matrix metering, i-TTL balanced fill-fl ash for digital SLR
5) AI-P Nikkor : All functions supported except 3D colour matrix metering, i-TTL balanced fill-flash for digital SLR, and autofocus
6) Non-CPU : Can be used in exposure mode M, but exposure meter does not function; electronic range finder can be used if maximum aperture is f/5.6 or faster *1 IX Nikkor lenses can not be used; *2 Excluding lenses for F3AF
Not sure about the flash...maybe StevenT will see this and help you out. Also, not sure if you've seen the full official spec sheet, but here it is. Click here (http://www.dphoto.us/modules.php?op=modload&name=News&file=article&sid=121).
WOW! That lens range sure is confusing.
Compatible Lenses
1) DX Nikkor : All functions supported
2) Type G or D AF Nikkor : All functions supported 3) Micro Nikkor 85 mm F2.8D : All functions supported except autofocus and some exposure modes 4) Other AF Nikkor*2 : All functions supported except 3D colour matrix metering, i-TTL balanced fill-fl ash for digital SLR
5) AI-P Nikkor : All functions supported except 3D colour matrix metering, i-TTL balanced fill-flash for digital SLR, and autofocus
6) Non-CPU : Can be used in exposure mode M, but exposure meter does not function; electronic range finder can be used if maximum aperture is f/5.6 or faster *1 IX Nikkor lenses can not be used; *2 Excluding lenses for F3AF
Not sure about the flash...maybe StevenT will see this and help you out. Also, not sure if you've seen the full official spec sheet, but here it is. Click here (http://www.dphoto.us/modules.php?op=modload&name=News&file=article&sid=121).
WOW! That lens range sure is confusing.
more...
njdude26
08-26 11:16 AM
Im planning to get an online MBA from phoenix univ or someother univ. Do you guys think it is helpful in getting a GC in case the SKIL bill is passed some day !
2010 computer components
aadimanav
12-28 02:06 PM
NSC Dec 2007 Processing Times says:
https://egov.uscis.gov/cris/jsps/Processtimes.jsp?SeviceCenter=NSC
"..The processing times shown below are for applications that have just been completed..."
In the table it mentions "April 24, 2007" as the date for EB based 485 adjustment applications.
Just for one sec assume that above date is right. What does "processing completion" of your 485 means? Does that mean your case is pre-adjudicated and waiting for the visa number and you won't get any RFE?
Also, when they are mentioning "April 24, 2007" date , are they ignoring the applicants who are stuck in namecheck process for years? If a person has filed 485 in 2005 or 2006 but stuck in namecheck, how come 485 is completed?
https://egov.uscis.gov/cris/jsps/Processtimes.jsp?SeviceCenter=NSC
"..The processing times shown below are for applications that have just been completed..."
In the table it mentions "April 24, 2007" as the date for EB based 485 adjustment applications.
Just for one sec assume that above date is right. What does "processing completion" of your 485 means? Does that mean your case is pre-adjudicated and waiting for the visa number and you won't get any RFE?
Also, when they are mentioning "April 24, 2007" date , are they ignoring the applicants who are stuck in namecheck process for years? If a person has filed 485 in 2005 or 2006 but stuck in namecheck, how come 485 is completed?
more...
.jpg "Hardware Components; Computer")
johnamit
07-27 03:49 PM
So if you run this query: select (current date - 26 days) + 180 days from sysibm.sysdummy1
you will get "12/28/2007"
So lets say Jan 1st to be on safe side, so this new year eve we can celebrate our independence from H1b employer. I marked on my calendar Independence day for me and lot of IV friends.
you will get "12/28/2007"
So lets say Jan 1st to be on safe side, so this new year eve we can celebrate our independence from H1b employer. I marked on my calendar Independence day for me and lot of IV friends.
hair The hardware components
st4rguitar
04-06 01:39 PM
I would definitely be interested to see how your MTR pans out. Please keep us posted. We filed a MTR back in 2005 for a PERM case that was denied because the salary was wrong on a job opening notice - we ended up winning the MTR and the case was approved but not until mid-2007. We have had some erroneous denials recently and are looking to file the motions to reconsider, so I would love to know your experience if you receive a decision.
I am in big need for help. I applied for my first LC based on Skilled employee (Category 3) because my first job financial analyst only required a bachelor degree even though I have a masters degree then I filed for the I-140. a year later, I got a promotion to a senior financial analyst which requires a masters degree (which I already had). so I filed a second LC (EB2) for the new position with the same company however, my LC was denied because the DOL thinks that there is no difference between the 1 job (financial analyst) and the second job (senior financial analyst) with the same company. so I checked with my lawyer and he said that I can file for appeal so the DOL will review their decision and realize that it was wrong. I did file for appeal (within the 30 day window) in Sep 2006 and I ve been waiting since then. MY HR manager sent emails and made many phone calls to Atlanta to find out about the status of my appeal but with no results. finally in Jan 2008, she sent another letter to ask for a status. does anybody know or have any idea how long the appeal normally takes so they can make a decision on my case?? please advise. Thank you
I am in big need for help. I applied for my first LC based on Skilled employee (Category 3) because my first job financial analyst only required a bachelor degree even though I have a masters degree then I filed for the I-140. a year later, I got a promotion to a senior financial analyst which requires a masters degree (which I already had). so I filed a second LC (EB2) for the new position with the same company however, my LC was denied because the DOL thinks that there is no difference between the 1 job (financial analyst) and the second job (senior financial analyst) with the same company. so I checked with my lawyer and he said that I can file for appeal so the DOL will review their decision and realize that it was wrong. I did file for appeal (within the 30 day window) in Sep 2006 and I ve been waiting since then. MY HR manager sent emails and made many phone calls to Atlanta to find out about the status of my appeal but with no results. finally in Jan 2008, she sent another letter to ask for a status. does anybody know or have any idea how long the appeal normally takes so they can make a decision on my case?? please advise. Thank you
more...
glus
10-20 08:22 AM
Hello,
As EAD is not same like H1-B, you can not work if the old EAD expires and new one is not issued (see an attorney's reponse here (http://forum.freeadvice.com/immigration-9/ead-renewal-195657.html) and here (http://murthyforum.atinfopop.com/4/OpenTopic?a=tpc&s=1024039761&f=1474093861&m=7161084702)). If EAD application is pending for more than 90 days, then you can open a service request and request expedited approval (there have been cases where such requests resulted in EAD approvals within a week). It is worth a try to approach the local USCIS and request a temporary EAD, but as far as I know, USCIS has stopped issuing such temporary cards.
It is important that you do not work in-between the expiry date of old EAD and start date of new EAD, so it is better to ask for unpaid leave for such time, though there is no need to quit the job. If the work demands are heavy, you may want to continue working as per 245k (but you will have to pay 1000 USD as fine), see the discussion here (http://immigrationvoice.org/forum/forum5-all-other-green-card-issues/20566-new-245-k-memo-released-with-more-clarifications.html).
Good luck!
hi there,
There is no 245(k), $1000 fee. This fee applied to different law, 245(i), which does not apply here. If a person works during the gap between EADs, he/she will incur "unauthorized employment". However, this clock stops when a new EAD is approved. As long as an Employment-based 485 beneficiary or derivative beneficiary did not incur 180 days of unauthorized employment or more, as in this case, his/hers I485 can be approved due to the 245(k) protection.
Best Wishes,
As EAD is not same like H1-B, you can not work if the old EAD expires and new one is not issued (see an attorney's reponse here (http://forum.freeadvice.com/immigration-9/ead-renewal-195657.html) and here (http://murthyforum.atinfopop.com/4/OpenTopic?a=tpc&s=1024039761&f=1474093861&m=7161084702)). If EAD application is pending for more than 90 days, then you can open a service request and request expedited approval (there have been cases where such requests resulted in EAD approvals within a week). It is worth a try to approach the local USCIS and request a temporary EAD, but as far as I know, USCIS has stopped issuing such temporary cards.
It is important that you do not work in-between the expiry date of old EAD and start date of new EAD, so it is better to ask for unpaid leave for such time, though there is no need to quit the job. If the work demands are heavy, you may want to continue working as per 245k (but you will have to pay 1000 USD as fine), see the discussion here (http://immigrationvoice.org/forum/forum5-all-other-green-card-issues/20566-new-245-k-memo-released-with-more-clarifications.html).
Good luck!
hi there,
There is no 245(k), $1000 fee. This fee applied to different law, 245(i), which does not apply here. If a person works during the gap between EADs, he/she will incur "unauthorized employment". However, this clock stops when a new EAD is approved. As long as an Employment-based 485 beneficiary or derivative beneficiary did not incur 180 days of unauthorized employment or more, as in this case, his/hers I485 can be approved due to the 245(k) protection.
Best Wishes,
hot computer parts Parts,
lskreddy
06-10 11:37 PM
The worst hit 140's are EB3 (and that too mostly in NSC and some in TSC). Not a single NSC EB3-140 is coming at < 400 days.
EB2 is coming still okay and EB1/EB2-NIW are pretty quick. So i dont see a good quantity of benefit by allowing Premium Processing only on a thin section of applications ?? It make a difference of few days, not even months.
Where they need to re-instate Premium 140 to give actual relief - they wont do anything.
I agree, it is extremely narrow. Not too many employers wait until the 60 days window and if you had H1 approved, you would not qualify. I do believe this may be just to test waters and they will broaden it further..
EB2 is coming still okay and EB1/EB2-NIW are pretty quick. So i dont see a good quantity of benefit by allowing Premium Processing only on a thin section of applications ?? It make a difference of few days, not even months.
Where they need to re-instate Premium 140 to give actual relief - they wont do anything.
I agree, it is extremely narrow. Not too many employers wait until the 60 days window and if you had H1 approved, you would not qualify. I do believe this may be just to test waters and they will broaden it further..
more...
house Computer Hardware Components
Raj2006
06-09 02:37 PM
My EAD case is pending at California service center. Please reply here to get an idea about their processing time.
please share your EAD renewal experience if you have application with WAC ( pending at California Service Center).
here is my information:
paper based filing on apr 27th 2010
notice date may 3 2010
got receipts on may 7 2010
in initial review status.
thank you very much.
paper based filing on apr 27th 2010
notice date may 3 2010
got receipts on may 7 2010
Got CPO on 06/07/2010.
please share your EAD renewal experience if you have application with WAC ( pending at California Service Center).
here is my information:
paper based filing on apr 27th 2010
notice date may 3 2010
got receipts on may 7 2010
in initial review status.
thank you very much.
paper based filing on apr 27th 2010
notice date may 3 2010
got receipts on may 7 2010
Got CPO on 06/07/2010.
tattoo computer, see Hardware
mchundi
07-28 01:36 AM
Currently my labor and 1-140 has been approved. But i havent been able to apply for I-485 due to retrogression. Hence if i change my job now and re-apply for labor will i continue to get extentions?
Also can anyone advice me that for a PERM application the pre-application i.e advertisements and stuff takes how long before i can actually apply for the labor. Also in Perm How long does one have to do the pre-application (advertisments etc)?
Can someone please help?
U will get a 3 year H1-B with the new employer.
i donot have experience with PERM. From what i know it varies from state to state. typically 6 months, may be longer or shorter.
--MC
Also can anyone advice me that for a PERM application the pre-application i.e advertisements and stuff takes how long before i can actually apply for the labor. Also in Perm How long does one have to do the pre-application (advertisments etc)?
Can someone please help?
U will get a 3 year H1-B with the new employer.
i donot have experience with PERM. From what i know it varies from state to state. typically 6 months, may be longer or shorter.
--MC
more...
pictures hardware components used
LostInGCProcess
01-08 12:54 PM
LostInGCProcess, Since you used AP to enter do you now loose your H1 status? just curious to know.
I read in other blogs that your status would be AOS if you enter using AP and not H1-B. If you need to retain H1-b then your I-94 needs to be stamped as that at the port of entry.
Any comments......
No. One can continue to work on H1 if its the same company.
I read in other blogs that your status would be AOS if you enter using AP and not H1-B. If you need to retain H1-b then your I-94 needs to be stamped as that at the port of entry.
Any comments......
No. One can continue to work on H1 if its the same company.
dresses Image of computer hardware
poorslumdog
08-23 09:08 PM
I am working as an industrial engineer since 2006. My labor certification approved in 2006 mentioned job title of industrial engineer (SOC Code- 17:2112), My I485 is pending since 2007, I have also kept H1B status alive, six years will expire in dec however current I-797 for H1B is valid till June 2011.
I may get promoted to an engineering manager position in next few weeks. I have few questions related �Promotion while I485 pending issue�.
1. Is the change from engineer to engineering manager allowed? If I guess correctly USCIS will take guidance from SOC codes 17:2112 (ENGINEER) and 11.9041(for manager)
Thanking you in anticipation.
Before someone gives you answer...can you answer this. Why someone should help you or provide any answer to you. In the last two years your post count is 5. So never participated in any drive, help fund raise....first IV need to get ride of selfish &*^%& like you. I wish and request others not to answer you...
I may get promoted to an engineering manager position in next few weeks. I have few questions related �Promotion while I485 pending issue�.
1. Is the change from engineer to engineering manager allowed? If I guess correctly USCIS will take guidance from SOC codes 17:2112 (ENGINEER) and 11.9041(for manager)
Thanking you in anticipation.
Before someone gives you answer...can you answer this. Why someone should help you or provide any answer to you. In the last two years your post count is 5. So never participated in any drive, help fund raise....first IV need to get ride of selfish &*^%& like you. I wish and request others not to answer you...
more...
makeup Hardware Components; Computer
jliechty
April 3rd, 2005, 08:51 PM
You can do a lot in this instance with a single well-exposed (highlights to the right, but not blown out) RAW file from a low-noise camera (e.g. anything but my D1). ;)
What you must do is to go through the RAW conversion process twice, making two files: one with the highlights placed where you want them (don't worry about the shadows), and another with the shadows brought up to the level that you'd like (the highlights will be blown out in this image). Now, stack the two in one image as two layers, and use a layer mask on the upper image to "paint" where the bottom one should show through.
This is explained in a tutorial (http://www.luminous-landscape.com/tutorials/blended_exposures.shtml) over at the Luminous Landscape. Given that he was using film when he wrote that, he included a bit on aligning the two images, which you won't need to worry about because both of your images came from the same photo. If you have any more questions, I'd be glad to help, or I'm sure one of our other members who's forgotten more about Photoshop than I'll ever know could help you even better. :)
Edit: $#%^, Gary beat me to it with the LL tutorial. Nevertheless, double RAW conversion works well [not quite, but good enough if you can't go back to do it again] with the same method outlined therein.
What you must do is to go through the RAW conversion process twice, making two files: one with the highlights placed where you want them (don't worry about the shadows), and another with the shadows brought up to the level that you'd like (the highlights will be blown out in this image). Now, stack the two in one image as two layers, and use a layer mask on the upper image to "paint" where the bottom one should show through.
This is explained in a tutorial (http://www.luminous-landscape.com/tutorials/blended_exposures.shtml) over at the Luminous Landscape. Given that he was using film when he wrote that, he included a bit on aligning the two images, which you won't need to worry about because both of your images came from the same photo. If you have any more questions, I'd be glad to help, or I'm sure one of our other members who's forgotten more about Photoshop than I'll ever know could help you even better. :)
Edit: $#%^, Gary beat me to it with the LL tutorial. Nevertheless, double RAW conversion works well [not quite, but good enough if you can't go back to do it again] with the same method outlined therein.
girlfriend We are selling computer parts.
qasleuth
01-08 12:52 AM
Thank you qasleuth ..... ..... ..... ..... frack you
Just read your post and you will see the same dastardly mistakes that I supposedly made.
The difference is: I did not pre-suppose my English is perfect.
Supposedly means 'hypothetical'. You did not 'supposedly' make them, you actually did. Sentences do start with capital letters and you need commas when appropriate.
Please dont take this as a personal one off attack. I have read quite a few of your posts. Here is a good reference URL for your perusal.
http://www.sfgate.com/cgi-bin/article.cgi?file=/chronicle/archive/2000/01/18/MN73840.DTL
Just read your post and you will see the same dastardly mistakes that I supposedly made.
The difference is: I did not pre-suppose my English is perfect.
Supposedly means 'hypothetical'. You did not 'supposedly' make them, you actually did. Sentences do start with capital letters and you need commas when appropriate.
Please dont take this as a personal one off attack. I have read quite a few of your posts. Here is a good reference URL for your perusal.
http://www.sfgate.com/cgi-bin/article.cgi?file=/chronicle/archive/2000/01/18/MN73840.DTL
hairstyles Image of computer hardware
mombemoo
April 4th, 2005, 08:15 PM
i love those shots on your website absolutely amazing
Dual exposure is the obvious and best solution to extremes in lighting but it necessitates setting up a tripod etc.
However, quite often one's best landscapes are an opportunity that presents itself on the spur of the moment. Frequently in these cases the lighting may not fit comfortably into the dynamic range and/or - dare I say it - one's exposure may also be hasty and less than optimum. Dual conversion of a single RAW file is is a great help in this regard. Whilst never quite as good as two separate exposures, I get the impression that the raw converter can extract a remarkable amount of hidden information from a file where the range is not too extreme.
In analogue terms this would be equivalent to being able to develop a single negative image twice with different dilutions temperatures etc (that would be a neat trick). The resulting image may not be technically perfect but may work perfectly in terms of aesthetics.
Kevin
http://homepage.eircom.net/~bot/paint/photo.htm
Dual exposure is the obvious and best solution to extremes in lighting but it necessitates setting up a tripod etc.
However, quite often one's best landscapes are an opportunity that presents itself on the spur of the moment. Frequently in these cases the lighting may not fit comfortably into the dynamic range and/or - dare I say it - one's exposure may also be hasty and less than optimum. Dual conversion of a single RAW file is is a great help in this regard. Whilst never quite as good as two separate exposures, I get the impression that the raw converter can extract a remarkable amount of hidden information from a file where the range is not too extreme.
In analogue terms this would be equivalent to being able to develop a single negative image twice with different dilutions temperatures etc (that would be a neat trick). The resulting image may not be technically perfect but may work perfectly in terms of aesthetics.
Kevin
http://homepage.eircom.net/~bot/paint/photo.htm
shantak
04-29 02:19 PM
You are missing a point here. I am on H1 through another desi firm. I stayed with them for 3 years and now my extension is coming up.My spouse's PD is May 2006 , his I-140 is approved and luckily he was able to apply for AOS last year during July fiasco. So I was able to apply for AOS as derivative on his 485. But because it is advisable that to maintain non-immigrant status while our AOS is pending I am confused whether to extend my H1 through my employer or use EAD that I got through my spouse. As you all know being able to apply for aos was very lucky opportunity last year and I do not want to mess up my aos application in anyway. I am concerned that if I am not able to respond to RFE in my H1 extension , it will affect my aos if they dig up my past.
I would not get too much worried, firstly apply for H1 extension, if by any chance you get an RFE and if you think you will not be able to answer it then withdraw the petition and shift to EAD.
I would not get too much worried, firstly apply for H1 extension, if by any chance you get an RFE and if you think you will not be able to answer it then withdraw the petition and shift to EAD.
lazycis
11-30 11:54 AM
It usually takes a long time for them to fix their own mistakes. So do not lose sleep over it. Write to the director of the service center. If that does not help, complain to CIS Ombudsman
No comments:
Post a Comment